How can we help you today?

Solution home Xeed 3D Printer

Software

Simplify3D Print Settings (.FFF)
This solution instructs you how to manually configure Simplify3D for optimum quality output with the Xeed 2015 The next Simplify3D update will have thes...
Tue, 20 Sep, 2022 at 6:13 PM
How to Configure Cura - Leapfrog Xeed 3D Printer
This solution article will explain how to set-up the printer as a 'Custom FFF printer' in Cura. Cura is a free slicer that can be used on your compu...
Fri, 11 Jun, 2021 at 8:59 AM

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library