The Xeed 2015 comes with two preheat temperature preset options programmed in the Temperature Tab: ABS and PLA
This solution shows you how you can add more.
NOTE: These are only PREHEAT settings. It's important to remember that you still need to assign Temperature Settings in the slicing software (Materialise, Simplify3D, etc.) so that your .GCODE file will tell the printer to maintain certain set temperatures throughout the print.
You will need:
- Keyboard with USB connection
- Knowledge of the recommended temperature settings for the filament type that you want to add.
STEP 1: Connect the Keyboard into one of the USB connection slots at the back of the Xeed printer.
STEP 2: Turn on the Xeed, and let it load to the main menu.
STEP 3: Click the Settings button at the top right.
STEP 4: Find "Temperatures" in the left-hand menu under the Printer Section:
STEP 8: Enter the recommended heat bed (preheat) temperature in the Bed field:
STEP 10: You can delete unused presents by clicking the red trash can button next to the preset. You can also edit current presets by clicking on the field that you would like to change and typing in the new value.
STEP 11: When you are all done, don't forget to click the Save button in the lower right corner:
We thank you for checking out our Leapfrog 3D Printer technical support solutions online! If you were unable to fine a solution in our database, please feel free to open a new support ticket by clicking the following link: I want to open a new support ticket.