Firmware

Firmware Update (Motor Control Board) Xeed
This solution link will help you flash the most recent version of firmware for your Xeed  2015 3D printer. (This does not work for the older model Xeed) ...
Wed, 11 Mar, 2020 at 8:46 AM
Software Update (User Interface) Xeed
Before beginning: Please unscrew the 6 screws on top of the printer to have access to the internal PC of the printer. Please make sure that you ver...
Wed, 11 Mar, 2020 at 8:57 AM

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library