Repair Instructions

Lilyprint solutions & Firmware solutions

Troubleshooting X and Y endstop switch
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. In order to check the function of your Y and X limit switches please follow ...
Tue, 10 Mar, 2020 at 10:26 AM
Troubleshooting filament extrusion
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. In this solution we will explain the role of the bowden tubes and the way th...
Tue, 10 Mar, 2020 at 10:29 AM
How to: troubleshooting the Z motors
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. If one of your Z stepper motors has stopped working this i quite a seriou...
Tue, 10 Mar, 2020 at 11:08 AM

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library