Repair Instructions

Lilyprint solutions & Firmware solutions

Replacement: Timing Belts
Hello and thank you for choosing the Xeed for your printing needs. The following solution will instruct you on how to align or replace your Xeed y-axis ...
Tue, 10 Mar, 2020 at 10:21 AM
Replacement: Printhead Fans
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to replace the print head fa...
Tue, 10 Mar, 2020 at 10:24 AM
"Low Disk Space" Error
Leapfrog Support Team Document - http://support.lpfrg.com | Applies To Leapfrog Xeed Series | This solution resolves the "Low disk space error"...
Tue, 10 Mar, 2020 at 10:50 AM
"Black Screen/White Cursor" Error
Leapfrog Support Team Document - http://support.lpfrg.com | Applies To Leapfrog Xeed Series | This solution provides resolution to the "black screen...
Tue, 10 Mar, 2020 at 10:50 AM
"503 Service Unavailable" Error
503 Service Unavailable Error LilyPrint 1.2 needs extra software package to be installed. When updating without the package the software will not start ...
Mon, 12 Apr, 2021 at 11:09 AM
Removing the printhead extrusion motor
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to replace the print head fa...
Tue, 10 Mar, 2020 at 10:32 AM
Adjustment: touchscreen calibration
It could be that you may at some point wish to recalibrate the touchscreen as you maybe when selecting the different options in the software menu you will...
Tue, 10 Mar, 2020 at 11:05 AM
Troubleshooting Max/Min Temperature error
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to address the M999 erro...
Tue, 10 Mar, 2020 at 10:58 AM
Troubleshooting X and Y endstop switch
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. In order to check the function of your Y and X limit switches please follow ...
Tue, 10 Mar, 2020 at 10:26 AM
Troubleshooting filament extrusion
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. In this solution we will explain the role of the bowden tubes and the way th...
Tue, 10 Mar, 2020 at 10:29 AM

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library