Documentation

User Manual
Please find the following document available for download below: Xeed Datasheet V01-08.pdf
Fri, 6 Mar, 2020 at 6:03 PM
Safety Information
Please find the following document available for download below: Xeed- Safety information V01-02.pdf
Fri, 6 Mar, 2020 at 6:04 PM
Datasheet
Please find the following document available for download below: Xeed- Safety information V01-02.pdf
Fri, 6 Mar, 2020 at 6:05 PM
Layout of the Xeed Electronics
The connection map bellow applies to the Leapfrog Xeed 3D printer: Miscellaneous: 1. SOLENOID -;                                2. SOLENOID +;  ...
Tue, 10 Mar, 2020 at 11:10 AM

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library