Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Preheat bed temperature

The heated bed of the CreatrHS takes a really long time to heat up. This could sort of be mitigated if the bed could be preheated to a fairly high temperature. Right now it is preheated to 40 degrees C which is not good enough because I print PLA at a bed temperature of 60 and ABS at a bed temperature of 95. So after everything has been preheated it takes another 10 minutes to further heat up the bed. Is there any way to change the preheat temperature standards? This should be fairly easy to fix using a firmware upgrade.

1 person has this problem

For PLA us the setting is 45 ° which works very well, but for the ABS, you have to be 90 ° while it is default to 80 °

For ABS I have found it matters what you are using as your print surface has a lot of bearing... If you are using the MAXX Perfect Print Surfaces (stickers) then you should get good adhesion at 80 degrees C but I do know a lot of people that believe in that high temperature like Solutions-Concept suggested... If you are using other materials as your print surface there can be varying temperatures that will work based on how they allow the heat to transfer.


Login or Signup to post a comment

User Manual

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library