Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Transparent hybrid filament

Does anyone know what material this hybrid is? 

what temp settings should I use? I use ABS settings, works more or less OK.. but I would like more info..

Below is what has worked for me.


Layerheight (mm) 0.2

Speed (mm/s) 50 (you can increase speed this is just what I tested at)

Temperature (C) 240-245

Build Plate Temperature (C) 60-70


Layerheight (mm) 0.1

Speed (mm/s) 50 (you can increase speed this is just what I tested at)

Temperature (C) 235-240

Build Plate Temperature (C) 60-70



Login or Signup to post a comment

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library