Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic
Constructive Criticism & Complaints 224

P
Solved
Posted by Param Mehta, about 2 years ago , Last Reply by Jan.weber 19 days ago
B
Posted by Bill thresher, about 1 month ago
Posted by Pedro Feliciano, over 3 years ago , Last Reply by Bill thresher about 1 month ago , 1 vote
Posted by Jouko Lehtomäki, 3 months ago , Last Reply by David Busmann 2 months ago
T
Posted by Tom Versluys, almost 3 years ago , Last Reply by David Busmann 2 months ago , 3 votes
N
Posted by Nils.waldherr, 2 months ago , Last Reply by Nils.waldherr 2 months ago
M
Posted by MARCOS CUEVAS LOAIZA, 4 months ago , Last Reply by Thiago Medeiros Araujo 2 months ago
H
Posted by Hennag Hansen, 4 months ago
m
Posted by marc kerger, over 2 years ago , Last Reply by Jpperrein 4 months ago , 2 votes
C
Posted by Colin Weiss, 7 months ago , 1 vote

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library