Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic
Feature Requests 62

Please tell us what features you want on future Leapfrog 3d Printers.

Posted by Ruud Oosthuizen, 4 months ago
Posted by Felipe Giannazzo, 5 months ago , Last Reply by Mircea.O 5 months ago
Posted by Jouko Lehtomäki, 5 months ago , 2 votes
Posted by Jouko Lehtomäki, 8 months ago , Last Reply by Jouko Lehtomäki 7 months ago
Posted by daniel bosschaerts, 8 months ago
Posted by Tobias Müller, 12 months ago , Last Reply by Matthew Hayduk 9 months ago
Posted by Oliver Schindler, over 2 years ago , Last Reply by Mircea.O 11 months ago
Posted by marc kerger, about 1 year ago
Posted by marc kerger, about 1 year ago
Posted by marc kerger, about 1 year ago

User Manual

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library