How can we help you today?

Solution home Xeed 3D Printer

Repair Instructions

Lilyprint solutions & Firmware solutions

How to: troubleshooting the Z motors
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. If one of your Z stepper motors has stopped working this i quite a seriou...
Tue, 10 Mar, 2020 at 11:08 AM
PC automatic boot when powered
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. This solution article will explain how to make the internal PC boot up, when...
Wed, 8 Mar, 2023 at 4:18 PM

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library