User Manual : Leapfrog Product Support Center

How can we help you today?

User Manual

Modified on: Mon, 10 Aug, 2020 at 8:55 AM

Please find the following document available for download below:

Leapfrog-3D-Printers_Xeed-Manual-v3.0.pdf

Leapfrog-3D-Printers_Xeed-Manual-v3.0.pdf

Leapfrog-3D-Printers_Xeed-Manual-v3.0.pdf

(1.96 MB)

Did you find it helpful? Yes No

Related Articles

Software Update (User Interface) Xeed

User Manual

Filament Guide

ABS

Extrude at ~ 225^o C.
Requires heated bed.
Works reasonably well without cooling.
Adheres best to polyimide tape.
Filament tolerances are usually tighter.
Prone to cracking, delamination, and wraping.
More flexible.
Can be bonded using adhesives or solvents(Acetone or MEK).
Fumes are unpleasent in enclosed areas.
Oil Based.

PLA

Extrude at ~ 180-225^o C.
Benefits from heated bed.
Benefits greatly from cooling while printing.
Adheres well to a variety of surfaces.
Finer feature detail possible on a well calibrated machine.
Prone to curling of corners and overhangs.
More brittle.
Can be bonded using adhesives.
More pleasant smell when extruded.
Plant Based.

Demo Print Downloads

Drivers Downloads

Slicer Software

Firmware Downloads

XEED Firmware 2.5

Xeed Video Library