Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Signal when extruder is feeded

Hi all, I am searching for a solution for the following... For an experiment I need a signal when the stepper motor is feeding one of the extruders of my Creatr XL. I was searching for some logic to directly connect to the 4 wires of the stepper motor that translate the signal on the motor to '0' when not rotating or rotating anti clockwise (not feeding) and '1' when rotating clockwise (feeding). But when there is a point on the board it would be easyer... Has anyone an nice solution for me? To be more informative, I want to mount a laser module on the printer to engrave or cut materials, and the laser has to be on at the moment the printer normaly extrude plastic.
Login or Signup to post a comment

User Manual

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library