Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

start point


I'm using a CreatrHS with Materialise and I'm printing Gcode with USB Stick.

Oftenly, printer don't start to print at the place I've planed in Materialise.

- I'm starting printer.

- I make an home positioning

- I'm loading Gcode from stick.

Then, Creatr start to print object at a random position (sometime, it tries to go out of printing area).

I'm pretty sure the problem doesn't come from software.

- I shut down Creatr.

- restart it, home positioning, start Gcode.

- then, it prints at good position.

Firmware seems to be the last one available (1.4.5c).

Any idea of what I should do ?


Could you upload a picture of the way you set up the model in the build area in Materialise?

Did you make sure you selected the proper printer in the build processor and loaded the platform for the proper printer?

Login or Signup to post a comment

User Manual

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library