Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

boot problem

Hello


does anyone have the same problem? sometimes when I start my HS the front screen does not boot and just stays black. I have to turn off and on again and then usually it works OK.



2 people have this problem

Yes mine stays black also... restart won't help... looking for a solution!!! Jog wheel does't react as well... when I turn al the way to the right and press, it doesn't go to Home position.

Hi, I do have the same trouble. I did not use the printer since a few months, Remember that last time I had some issues with printing (bad quality) and din't understand why. Now, I turne it on, and black screen. Back off and on again and always black screen ... Any ideas to qualify what is happening ? Best regards, Jean-Pascal
Login or Signup to post a comment

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library