Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

CreatrHS strange behavior when starting a print

Does this behavior seem normal to anyone? When I start a print, when it draws the boundary around the print area, it seems to have a really hard time, it glitches and pauses sometimes making a lot of noise. However, when the print starts, it prints with normal movement.


Start of Print:



After Print Begins:


1 person has this problem

the start print video isn't working. Here it is again:


I sometimes get this, not quite as bad as your video though. I put it down to the way simplify3D has to increase the outer perimeter to make the skirt/brim. I assume it takes the original mesh points, moves them away, and extrapolates between them. This extrapolation doesn't create very smooth movements. I could be wrong but that's the conclusion I drew

 

Login or Signup to post a comment

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library