Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Wear resistant nozzle


I'm looking for a nozzle wear-resistant.

I found on the net but I do not know if these nozzles are compatible with the Creatr.

These are "MK8" nozzles, compatible with all "replicator" Makerbot. Can I use them with my Creatr?


1 person likes this idea


I also need better nozzles. I cannot find any for creatr. I will have some made of stainless steel from a company, i hope they last longer. If this is still not good enough I will see to make some of even harder metal.

Carbon fiber and metalfill filaments destroy a brass nozzle in a few hours or days.

Let us know if you can find em on internet

Unfortunately, I have not found.

I had to buy a different brand of 3D printer :-(

Login or Signup to post a comment

User Manual

Filament Guide

  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library