Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Extruder Not Heating

I just clean nozzle of extruder and when i fix it back the temperature stop raising.


i verified the heaters its fine but still when i put heater back to the printer it will not work.


Please some one advise me on this issue 


My whats-app number is +966597733640 please send me your suggestion.



Dear asim ali,


Is the thermistor connector tightly in its place? As well, is your software reading the room temperature or is it showing 0 C; do you see in the "Communication" tab any M999 error; when heating the extruder, does the led from the electronic board corresponding to the E0/E1 (whichever you have the problem with) thermistor mosfet light up?

Login or Signup to post a comment

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library