Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

strange banding? on second layer Help...

Hello,

Getting this strange apparently random banding on my second and subsequent layers.  First layer is fine but then I get this.


Using fresh PLA from leapfrg and their recommended settings 220C.


Any ideas?


I thought maybe the tension on the etxruder but made it real loose and no help.  It was so tight from the factory that it actually deformed the filament (deep teeth marks) and made it hard to go through the Teflon tube.  I loosened it quite a bit and seems to feed fine.


I did the PID temperature fix and temps seem OK too.


frustrating.... among other things like the warped glass bed....


Thanks


JPG
(386 KB)

Thant happens from either the bed temperature being too low or the distance between the nozzles and the bed is too high. Also, I would recommend printing PLA at 210 C and the bed at 50-60C.

Login or Signup to post a comment

User Manual

Filament Guide

ABS
  • Extrude at ~ 225o C.
  • Requires heated bed.
  • Works reasonably well without cooling.
  • Adheres best to polyimide tape.
  • Filament tolerances are usually tighter.
  • Prone to cracking, delamination, and wraping.
  • More flexible.
  • Can be bonded using adhesives or solvents(Acetone or MEK).
  • Fumes are unpleasent in enclosed areas.
  • Oil Based.
PLA
  • Extrude at ~ 180-225o C.
  • Benefits from heated bed.
  • Benefits greatly from cooling while printing.
  • Adheres well to a variety of surfaces.
  • Finer feature detail possible on a well calibrated machine.
  • Prone to curling of corners and overhangs.
  • More brittle.
  • Can be bonded using adhesives.
  • More pleasant smell when extruded.
  • Plant Based.

Demo Print Downloads

Drivers Downloads

Software Downloads

Firmware Downloads

Please request a firmware download via the Ticket System

Xeed Video Library